What are the construction methods of the wood imitation railing coating? The following by the Xifu Planning and Design Institute to introduce to you, I hope our introduction can better help you.
1. Base treatment: first, the concrete components of the base surface residual corrugated, floating ash, floating sand stone and oil stains, etc. clean, and then with 107 glue and water 1 times blended evenly brush the bottom, slightly dry after the next process.
2. Scraper coating: The prepared coating material is forced to be spread with the scraper, each time the thickness is about 0.5 cm. After the coating is slightly drier, second layers can be scraped and scraped 2~3 times.
3, coating surface treatment: after construction coating is dry, it needs to be polished and polished by 0 iron sand cloth. After grinding, the surface color will be uneven, and then brush with 107 color paste. After a little drying, it will coat 2~3 layer vinyl chloride vinylidene chloride copolymer emulsion. The inner eaves coatings treated by this method have bright and uniform colors, good plumpness, decorative effect and chemical corrosion resistance. The mixing ratio of 107 gel paste is: l07 glue 10, iron oxide pigment 1.5~2.5, water 4~5.
The above introduction about the construction method of cement imitation wood balustrade coating is made and edited by Jinan Rockery. For more information, visit our website: http://www.lounge-f.com, there are more content in the website, hoping to help you!