How to make a simple one for others to come to your house and see "I want it too!" Rockery
Here we take the manufacture of balcony rockery fish pond as an example, we are divided into six steps: 1. model manufacturing, 2. stone selection, 3. fish pond masonry, 4. painting waterproof powder, 5. manufacturing rockery, 6. installing circulatory system. Only according to the operation method we introduced, step by step, conscientious theory, small indoor rockery fish pond, I can easily fix it.
I. Model Manufacturing
The rockery model can make a rough shape of a rockery with foam. Under normal circumstances, large rockery needs to make rockery models. I can draw a sketch of a rockery by hand. Because I make rockery, as long as I can understand, do not make professional rockery model.
2. Selected stones are now commonly used in making artificial fish ponds in workstations. There are four types of stones: quartz, tortoise-grain stone, absorbent stone, thousand-layer stone and so on. (In terms of price, absorbent stone is the most expensive one.) We list some selection criteria: 1. Yingshi: originated in Guangdong, many friends in Guangzhou will choose Yingshi for decoration. Because of the proximity, our first long-term criterion is to select the nearest stone, because the transportation is convenient and the price is favorable. Following chart
2. The choice of stone materials should vary in size. This is a sense of design. Large stones are placed below and small stones are placed above. This is our second criterion. Size criterion 3. Under the condition that it fits nearest criterion, stone materials should be selected according to the type of fishpond used to make balcony rockery. Thousand-bedded stones, English stones and absorbent stones should be selected for making rockery fountains, and tortoise pattern should be chosen for making rockery fountains. Stone, absorbent stone.
3. Fish ponds are usually built with ordinary red bricks. As deep as fish ponds want to be, red bricks will be built as high as possible. After the fish pond is built, it is OK to add pebbles to the outer layer before the cement mortar is dry. It is very simple (ps: there is no need to add pebbles inside). The effect is as follows:
Fourth, after painting waterproof powder to build a fish pond, watering for a day, the leak-proof construction can be stopped. Waterproof glue can be bought in hardware stores. Waterproof powder and water repellent are usually used as waterproof materials for concrete. After the foundation of the pool is built, the leak-proof method is to use waterproof mortar to finish the surface. The surface should be divided into two stops, each time the thickness of the surface is about 10 mm. When the second waterproof mortar first solidifies, the surface should be compacted and polished.
Fifth, based on the first step of making a good model of rockery, rockery, mountain, grass and other materials are separated and arranged in the fishpond space. In fact, it is bonding, can refer to the appearance of network pictures, to have confidence in my appearance can I gradually bond 1, adjust the cement slurry: when mixing the cement slurry, pay attention to the consistency of the slurry. In order to increase the solidification time, the leak stoppage data can be participated in in a proper amount in the cement; regarding the need to adhere to the stone body, it can be fixed with dolomite glue, after the colloid is dried, the colloid can be covered with cement slurry to harmonize the color. 2. Stone processing: Stone is naturally unprocessed, so it is necessary to stop the sawing, joining and bonding of stone according to the landscape request. Stop the sawing of stone with a cutting machine or a steel saw. Stop the sawing of stone by hammering and leveling. 3. Bonding mountain body: Cement or chemical agent can be used to bind mountain stone. Cement has high bonding strength, low cost and convenient use. Resin adhesives and other chemicals also have good bonding effect, but the cost is high. So cement is commonly used.
VI. Water Purification System and Circulation System of Installation
The last step will be a little more difficult. The return water of the fountain and the small waterfall is basically self-circulating. It uses a pump to absorb water from the pool and supply it to the source of the waterfall, which then falls back into the pool and circulates back and forth. When the water in the pond becomes less, it can turn over the water supply valve and participate in the new tap water.
Well, that's how your private little landscape is done.