Stone rockery is a kind of plastic rockery made of reinforced concrete, which is made by manual welding of internal steel skeleton and exterior cement moulding. The internal structure of the rockery supports the whole rockery project, so the solid internal structure is the foundation of the longevity of the rockery rockery. The structure is composed of contact surface foundation, steel structure and wire mesh. Any faults on one hand will affect the overall structure of plastic rockery prosthesis. In the construction, we should pay attention to a few points:
Reinforcement layer is welded in place with spacing less than 25CM to ensure the firmness of the surface layer.
2. Anti-rust treatment is used for steel structure, welding with scissors and forks and anti-rust paint for all welding points. If the funds are in place, galvanized steel structure can be used to complete.
3. Galvanized wire mesh is the best choice, and ensure that the wire mesh is completely covered in cement, cement plastic rockery rockery surface can not expose the wire mesh. At present, the use of internal and external wire mesh wrapping, plus grouting to reinforce the surface of plastic rockery rockery.
Whether it is a large plastic rockery or a small plastic rockery sketch, long-term exposure to the air will be infected with dust, seasonal replacement will also have the product of deciduous leaves. Many people think of using water gun to wash and tidy up, which, although simple to operate, may damage the color layer of the plastic stone surface. How to clean up the dust on the surface of rockery? Today, I will briefly introduce the cleaning methods of rockery sculptures for you.
1. In order to clean up the contaminants on the surface of rockery in time, rockery and gaps on the surface of rockery will inevitably have some gaps on the surface, so many contaminants will be simply soaked in, which will change the structure of rockery and form some people's weary stains. So we need to check the quality of rockery's protective agents when we select them.
The color layer on the surface of plastic stone is water-based pigments, which can not be mixed with oily substances. Otherwise, the color layer will be damaged. Water-based solvents with less irritation and corrosiveness can be easily selected as protective agents. It is suggested that professional rockery manufacturers be consulted for protection operation.
2. The need for regular maintenance to protect the appearance of the gloss, simple removal of the dust on the surface is unable to make the gloss of the plastic stone surface lasted too long. So we need professional protection, using crystalline liquid or polishing powder to make the stone surface glossy again, but also can use breathable glow shield to achieve the same effect.
3. Regular cleaning of dust and fallen leaves. The time mentioned here can be once a month or once a quarter, but not more than one quarter at the longest. Dust and fallen leaves may adhere to plastic stones for a long time, which is not easy to clean up. Can choose air pump to sweep, difficult to clean up part, choose water gun to spray far away for example, so that the dust gradually slides down. After finishing, we can buy waterborne emulsion spray from professional rockery manufacturers for protection.
For the oily dirt which is difficult to clean up, it is better to invite professional rockery manufacturers to clean up. It involves the protection and protection of the color layer of the rockery surface, which is not simple water finishing. After finishing, the problem of excessive color on the surface of rockery may need to be repaired, which is the work of professional and technical personnel. Timely dust treatment can make the rockery commonly used and new, increase the gloss of the surface of the rockery, and also extend the service life of the rockery.
Above is the relevant content of Jinan rockery production, more news information can be clicked on our official website for consultation: http://www.lounge-f.com