1, to adjust the cement slurry, slurry to be in tune with the attention, but also pay attention to dilute pulp consistency. In order to increase the solidification time can be added in the cement plugging material; for stone body attached to other available stone, marble glue fixed, covered with cement slurry in the colloid colloid after dry, to coordinate the overall tone.
2, stone processing, the need to glue the stone, with hammer, chisel, saw and other tools, processing texture and more strange shape. In order to ensure the upper and lower stone support each other, the contact parts need to be cut.
3, in need of adhesive bonded mountain, stone surface covered with cement slurry to make rocks anastomosis as a whole, should pay attention to the adhesive, the relatively large, heavy and sticky instability of stone, do not support well, stick with adhesive, after the cement slurry completely well, then put them away. As far as possible so that the stone joints can not see the broken traces, but also pay attention to the excess pulp at the junction clean. In order to approach the natural cementation, mud can not do in the stone seam with Saben stone. After gluing, first use other support to assist. The glue can solidify in 24 hours. The cement can be moved for half a day in summer and 1-2 days later in winter. 3-4 hours after the cement has been cemented, the cement can be scraped away with a small saw blade, or the cement will be pulled out of the joint and the same texture as the stone.
We will use good, appropriate service, so that customers feel the warmth of family ties, always depending on the safety of customers, such as ourselves. We will use our natural advantage to create a unique product that will give consumers a unique mood to enjoy the product.