承接項目
新聞中心

濟南假山製作中假樹的製作流程

1 根據施工總平麵圖 假山製作方法,進行場地整理,暢通道路,對實地進行勘查,複核標高及與周圍建築的相互位置關係,確定施工範圍。
1, according to the general plan of construction, rockery production methods, site consolidation, clear the road, the field investigation, review the elevation and the surrounding building of the relationship between each other, to determine the scope of construction.
2、放樣開線挖土方澆混凝土墊層打基礎。
2, line lofting excavation concrete cushion foundation.
3、預埋件位於現澆砼上表麵時,據預埋件尺寸和使用功能的不同,有如下3種固定方式。
In 3, embedded parts of cast-in-place concrete on the surface, according to the embedded size and the use of different functions, there are 3 kinds of fixation methods.
4、平板型預埋件尺寸較小,可將預埋件直接綁紮在主筋上,但在澆築砼過程中,需隨時觀察其位置情況,以便出現問題後及時解決。
4, flat plate embedded parts are small in size, can be directly embedded in the main bar lashing, but in the concrete pouring process, the need to observe the position at any time, in order to solve the problems in a timely manner.
5、角鋼預埋件也可以直接綁紮在主筋上,為了防止預埋件下的砼振搗不密實,應在固定前先在預埋件上鑽孔供砼施工時排氣。
5, steel angle can also be directly binding on the main bar, in order to prevent the concrete vibration under non compacting ramming embedded parts, should be fixed before drilling for concrete construction in embedded parts exhaust.
6  麵積大的預埋件施工時,除用錨筋固定外,還要在其上部點焊適當規格角鋼。建造骨架結構骨架結構有磚結構、鋼架結構以及兩者的混合結構等。
濟南假山製作
6 large construction area embedded parts, except fixed with anchor reinforcement, but also in the upper part of the appropriate specifications of angle steel welding. Construction of skeleton structure, skeleton structure, brick structure, steel frame structure and mix structure of the two.
7、在已經成型的骨架上麵鋪上小型鋼筋,用電焊機焊接、固定、造型。這一步基本能確定假山的基本形狀。
7, in the framework has been formed on the small steel reinforcement, welding with electric welding machine, fixed, modeling. This step can basically determine the basic shape of the rockery.
8、鐵絲網片綁紮:把鋼絲網鋪在已經造好型的鋼架上假山 製作方法,然後用小鋼絲進行捆綁、固定。
8, wire mesh banding: the steel wire mesh in the already made steel frame, rockery manufacturing method, and then use small wire for binding, fixed.
9、泥底塑型用水泥、黃泥、河沙配成可塑性較強的砂漿在已砌好的骨架上塑型。反複加工 假山製作,使造型、紋理、塑體和表麵刻劃基本上接近模型。
9, mud molding with cement, yellow mud, river sand with a strong plasticity mortar, has been built on the framework of the molding. Repeated processing rockery production, so that the shape, texture, plastic and surface characterization basically close to the model.
10、塑麵在塑體表麵細致地刻劃石的質感、色澤、紋理和表層特征。質感和色澤根據設計。
10, the plastic in the plastic body surface carefully carved stone texture, color, texture and surface features. Texture and color according to the design.
本文由濟南假山製作提供,更多的精彩內容請點擊秋葵视频官网二维码下载的官方網站:http://www.lounge-f.com秋葵视频官网二维码下载會有更加詳細的內容為您解答,感謝您的訪問。
This article is made by Ji'nan rockery, more exciting content, please click on our official website: http://www.lounge-f.com, we will have more detailed answers for you, thank you for your visit.
濟南秋葵视频官网二维码下载假山水景園林
技術支持:濟南諾商

谘詢熱線:
13064079165
在線客服