Making rockery in Jinan: before the rockery is made, you must have a clear idea of what kind and shape to make. Otherwise, you can't start. According to the conception, draw the outline shape on the paper.
Tools / raw materials
Tools: electric cutting saw, chisel, pliers, construction hammer, ash shovel, 5-minute width brush, etc
Materials: ash bucket, rock, cement, sand, dolomite rubber, submersible pump, water suction pipe, waterproof electrical tape, flowers and moss, etc.
Method / step
The first step: first of all, the cement slurry should be adjusted as soon as it is used, and the consistency of the slurry should also be paid attention to. In order to increase the setting time, appropriate amount of plugging materials can be added into the cement; for the stone body which needs to be attached with molding stone, it can be fixed with dolomite glue, and after the colloid is dry, the colloid is covered with cement slurry to coordinate the overall color.
The second step: stone processing, the need to glue the stone with hammer, chisel, saw and other tools to process texture and more peculiar shape. In order to ensure that the upper and lower stones support each other, the contact parts need to be cut. Cutting points:
(1) According to the drawing, determine the position and size of the main body. Then slowly flatten the bottom with a small saw. Then the face of the cave is processed according to the texture of the cave. The loose stone can be cut with a hacksaw, while the hard stone can be cut with an electric steel grit saw blade.
(2) Carving must first focus on the big, with hammer, chisel and other tools to carve out the general outline of the mountain, and then carry out fine processing. Remember: when processing, try to keep the natural beauty of the stone.
The third step: bonding the mountain, in the need to bond the surface of the rock with cement slurry to make the rock match as a whole, pay attention to the bonding part of the rock can not see the trace of fracture, but also pay attention to remove the excess slurry at the bonding part. Bonding points:
(1) The stone quality, texture, color and momentum of several stones should be similar.
(2) In order not to affect the water absorption of Shifeng, it should be overlapped horizontally instead of up and down.
Note: the height and size of rockery should be coordinated with the height width ratio of rockery.
How to calculate the price of rockery production?
The main factors for quotation are as follows:
1. The size of rockery, the choice of stone, stacking method;
2. Whether the fish pond has been completed and the depth of the fish pond should be dug down or on the ground;
3. Whether filter is used or not;
4. Whether the selected ornaments are beyond the scope of gift;
6. Construction waste disposal, etc
Rockery production in Jinan
Specific offer can not be generalized, welcome to consult our online customer service, if customer service is not online, you can provide your demand message to us or call us, we are very happy to serve you.
How to confirm the size of rockery?
The size of the rockery is the size of the rockery that you have reserved for the construction of a fish pond. The size of the rockery is determined according to the size of the fish pond, so as to achieve coordination and unification.
The depth of the fish pond is determined according to the size of your fish. If you only keep small fish and turtles, the depth of the fish pond is 30-50cm;
If you raise a larger fish, the depth of the fish pool you need will be more than 60cm;
The size of the mountain depends on the size of the fish pond, with a general ratio of 1.2-1.5:1