當提到雕刻過程時，您是否想到雕塑藝術中的雕刻技術？ 塑料假山生產中的雕刻技術與雕塑中的雕刻技術具有相同的效果。 它們都在雕刻表麵上形成形狀和紋理。 塑料假山上的雕刻是刻在水泥砂漿的表麵上的，水泥砂漿是各種石材圖案。 今天，小編將在塑料假山生產中介紹雕刻工藝。
When it comes to the process of sculpture, do you think of the sculpture technology in the art of sculpture? The sculpture technology in the production of plastic rockery has the same effect as the sculpture technology in the sculpture. They all form shapes and textures on the carved surface. The sculpture on the plastic rockery is carved on the surface of cement mortar, which is a variety of stone patterns. Today, Xiaobian will introduce sculpture technology in the production of plastic rockery.
水泥砂漿的初始凝固時間為0.5至3小時。 在添加各種添加劑的情況下，初始凝固時間可以延長至6小時。 第二層砂漿和第三層砂漿的初始凝固時間是在塑料假山中雕刻的時間。 藝術家通過各種技術掌握了假山的質地和微妙的形狀。
The initial setting time of cement mortar is 0.5 to 3 hours. When various additives are added, the initial solidification time can be extended to 6 hours. The initial solidification time of the second and third layers of mortar is the carving time in the plastic rockery. The artist has mastered the texture and subtle shape of the rockery through various techniques.
塑料假山的雕刻工藝主要分為兩種，一種是塑料型。 另一種是雕刻型，兩者的區別在於灰分法（灰漿法），而塑料雕刻工藝主要在砂漿表層上形成紋理。 仿紋理主要是石頭的麻點。 砂漿的表麵用掃帚或假刷子打漿。 使用壓紋圖案，然後打開接縫。 塑料雕刻工藝幾乎不會增加假山的小形狀。 雕刻型塑料假山技術通過切割和刮擦在灰漿表麵上雕刻紋理，後呈現出石頭般的紋理。 質地具有很強的凹凸紋理，幾乎可以生產各種石材圖案。 雕刻過程很耗時。 在生產過程中形成的砂漿層較厚，通常需要兩層砂漿形成，厚度大於3 cm，使用的工具更多，包括雕刻刀，鑷子，縱剪刀，假山刷等。
The sculpture technology of plastic rockery is mainly divided into two kinds, one is plastic type. The other is sculpture, the difference between them is ash method (mortar method), while plastic sculpture technology mainly forms texture on the surface of mortar. The imitation texture is mainly the pitting of stone. The surface of the mortar is beaten with a broom or a fake brush. Use embossed patterns and open the seams. Plastic sculpture hardly adds to the small shape of the rockery. Sculptured plastic rockery technology carves texture on mortar surface by cutting and scraping, and finally presents stone-like texture. The texture has strong concave and convex texture, and can produce almost all kinds of stone patterns. The carving process is time-consuming. The mortar layer formed in the production process is thicker. Usually two layers of mortar are needed. The thickness is more than 3 cm. More tools are used, including carving knives, tweezers, longitudinal scissors, rockery brushes and so on.
雕刻工藝廣泛用於塑料假山的生產，這是假山細線和小形狀的關鍵。 在製作假山之前，您需要仔細參考石材效果並進行部分采樣。 隻有經過甲方批準，才能進行大規模建設。
Sculpture technology is widely used in the production of plastic rockery, which is the key to the fine lines and small shapes of rockery. Before making rockery, you need to carefully refer to the stone effect and take some samples. Only with Party A's approval can large-scale construction be carried out.