Hammer. Flat hammer (such as axe shaped), suitable for the processing of cancellous stone; pointed hammer (i.e. a pointed end, one end of the flat), and carved stone to the hole; flat hammer, to play. These three hammers should be individually made of big, medium and small sizes according to their own needs. Chisel. Used to make holes, holes, and stones. The chisel must be made of steel. The length and size of the chisel should be determined according to the requirements. A few sets of chisels with different specifications can be prepared.
The hacksaw. By using the bowsaw fitter, but saw to thicker. Hacksaw for cutting loose stone and stone in the longitudinal and transverse cut stone.
The knife. A flat, round, oblique mouth shape, to have a variety of knife. Knife for Turquoise carved.
⑤篩子。以金屬製的耐用，用以篩泥、砂、肥料等。 ⑥小鏟。主要用來拌和水泥以及配石時鏟水泥拚接山石。 ⑦刷子。水泥膠接山石前，必須用刷子將交接口刷淨，膠接後，把在外圍的水泥輕輕刷去。
Sieve. Made of metal, the most durable, used to sift mud, sand, fertilizer, etc. The small shovel. Mainly used for mixing cement and stone, shovel cement, splicing rocks. The brush. Cement bonded rocks must be submitted before the interface brush brush glue, to gently brush at the periphery of the cement.
Cement. The higher the mark, the better. Both loose and hard stones can be joined together with cement, but white cement is used to join the white stone.
Yellow sand. Used for mixing cement, such as the use of white cement, is going to use the white sand instead of broken rice.
Pigment. In order to make the interface color and the stitching stone similar, so that after making stone without leaving traces, multi ink or toner mixed with cement.