承接項目
新聞中心

假山製作中的骨架你都了解嗎?

假山是目前假山中的常用品種,現場施工,可以仿造自然界中的多種石材,可做小品也可做大型山體。很多人可能都知道塑假山是由鋼架焊接而成的,骨架是塑假山製作的首步,今天本文就為大家簡要介紹一下塑假山製作中的骨架,其中圖片展示的部分均為我公司施工現場的照片,也能為大家帶去更直觀的感受。
Rockery is a common kind of rockery at present. Site construction can imitate a variety of natural stones, and can be used as a sketch or a large mountain. Many people may know that the plastic rockery is welded by steel frame, and the skeleton is the first step in the production of plastic rockery. Today, this paper will briefly introduce the skeleton in the production of plastic rockery, and the parts shown in the pictures are the photos of our company's construction site, which can also bring you a more intuitive feeling.
塑假山製作中的骨架以鋼結構骨架為主,市場上也有木骨架、磚石骨架等方式來代替,但主流還是鋼結構骨架,其中鋼結構的骨架分為兩個部分,有主支撐骨架和鋼筋層骨架,主支撐骨架主要承受整體塑假山的重量,與地基相連接,選材有角鋼、槽鋼和工字鋼等;鋼筋層骨架采用6號、6.5號圓鋼焊接,塑造出假山的大體造型,以便後期的假山紋理塑造,鋼筋層骨架後期承擔假山紋理麵層的重量,與主支撐骨架一起焊接,增加整體假山的穩定性。
In the production of plastic rockery, the skeleton is mainly made of steel structure, and there are wood skeleton, masonry skeleton and other ways to replace it in the market, but the mainstream is steel structure skeleton. The steel structure skeleton is divided into two parts, the main support skeleton and the reinforcement layer skeleton. The main support skeleton mainly bears the weight of the whole plastic rockery, and is connected with the foundation. The materials are angle steel, channel steel and I-beam; No. 6 and No. 6.5 round steel are used to weld the reinforcement layer skeleton to create the general shape of the rockery, so as to shape the rockery texture in the later stage. The reinforcement layer skeleton bears the weight of the rockery texture surface layer in the later stage, and is welded together with the main support skeleton to increase the stability of the overall rockery.
骨架製作在工程中屬於隱蔽工程,在隱蔽之前需要進行嚴格檢查。室外施工中,骨架均要進行防鏽防腐處理,塗刷防鏽漆和防腐漆,的做到防鏽防腐;骨架部分能采用熱鍍鋅材料的,必須用熱鍍鋅材料。
Skeleton fabrication is a kind of concealed work in engineering, and it needs to be strictly checked before concealment. In outdoor construction, the framework shall be treated with anti rust and anti-corrosion, and painted with anti rust paint and anti-corrosion paint to achieve the maximum degree of anti rust and anti-corrosion; if the framework can be made of hot-dip galvanized material, it must be made of hot-dip galvanized material.
整體骨架焊接完成後才能進行麵層的塑造,骨架焊接完畢,塑假山鋼結構整體性統一,使用壽命將增強。主支撐骨架的造型以橫豎交叉為主,豎向骨架承載主壓力,橫向骨架固定豎向造型;鋼筋麵層骨架的凹凸及彎曲跟著假山的細節走向進行,橫向及豎向間隔不大於20cm,焊接以麵焊為主。
After the welding of the whole framework, the surface layer can be molded. After the welding of the framework, the integrity of the steel structure will be unified, and the service life will be enhanced. The shape of the main support framework is mainly vertical and horizontal crossing, the vertical framework bears the main pressure, the horizontal framework is fixed, and the vertical shape; the concave convex and bending of the reinforcement surface framework follow the details of the rockery, the horizontal and vertical spacing is not more than 20cm, and the welding is mainly surface welding.
濟南秋葵视频官网入口下载假山水景園林
技術支持:濟南諾商

谘詢熱線:
13064079165
在線客服