承接項目
新聞中心

水泥塑石假山製作方法

水泥塑石假山即是指混凝土、玻璃鋼、有機樹脂等現代材料和石灰、磚、水泥等非石材料經人工塑造而成的假山。塑山與塑石可節省采石運石工序,造型不受石材限製,體量可大可小。
Cement and stone rockery refers to the artificial rockery made of modern materials such as concrete, FRP, organic resin and other non stone materials such as lime, brick and cement. Plastic mountain and plastic Shi Ke save stone operation process, the shape is not limited by stone, the volume can be small.
濟南假山製作的步驟:
The steps of the Ji'nan rockery production:
一:主龍骨搭建,所用材料大小應根據假山大小需要,一般是角鋼、槽鋼之類,如果需要的話,搭建主龍骨的過程應同時搭建腳手架,這個過程要做到整體承重及搖擺的承受能力,要牢;
One: the construction of main keel should be based on the size of the rockery and the angle steel and the channel steel. If necessary, the scaffold should be built at the same time. The whole bearing capacity and the bearing capacity of the swing must be kept firmly.
二:搭建副龍骨,把假山的基本形焊出來,這個過程要做出基本的起伏關係;
Two: build a vice keel, welding the basic form of the rockery, this process to make basic ups and downs;
三:用角鋼加固副龍骨與主龍骨之間的銜接並將主結構進一步加固;
Three: use angle steel to reinforce the connection between the auxiliary keel and the main keel and further reinforce the main structure.
四:用線材將造型加密細分至15cm左右見方的網格狀;
Four: use the wire to subdivide the molding to the grid like about 15cm.
五:將龍骨做好防鏽處理;
Five: the keel is treated with rust prevention.
六:用鍍鋅鐵絲網將鋼架包裹起來,網孔大小大約1cm比較合適,注意除去朝上的麵以外盡量不要重疊。
Six: the steel frame is wrapped up with galvanized wire mesh. The size of the mesh is about 1cm suitable, and should be careful not to overlap as much as possible outside the face.
客戶的滿意就是對秋葵视频官网下载的肯定,歡迎您前來選購我公司的產品,秋葵视频官网下载一直以為您提供產品為己任並一直堅持這樣做。歡迎您的光臨。
Customer satisfaction is our affirmation. You are welcome to purchase our company's products. We have always thought that you are responsible for products and have always insisted on doing so. Welcome to your visit.
濟南秋葵视频官网app假山水景園林
技術支持:濟南諾商

谘詢熱線:
13064079165
在線客服