1. Familiar with drawings. The drawings including rockery floor plan, the top plane, three-dimensional map, profile and caves, drawing top knot etc..
2, Ji'nan rockery production according to the proportion of 1:10 at 1:50 to enlarge the floor plan, to determine the range of rockery and the locations of the mountain.
3, site production: according to the proportion of 1:10-1:50, make a plane plate with wooden board, carve the vertical and horizontal coordinates on the plate surface.
4, Ji'nan rockery production skeleton: mainly use blow plastic paper to cut, cut, paste, or use other materials such as foam material to make skeleton.
5, shape: in the rockery flat board, according to the peak elevation of erect poles, the hemp thread wound over the post, and then put the gypsum powder mixing water into a paste like thick liquid and then apply it. Take 20 grams of gypsum each time, add a small amount of water to the thickening, gradually paste on the rockery skeleton, then use it to adjust the gypsum again, stratified and pasted to achieve the requirement of modeling design.
6, brush pulp: through the brush model using brush dipped gypsum slurry.
7, coloring: mix the chrome green with water, add ink and a little plaster, then dip the color with the brush, brush the model and the chassis.
This article is about the friendship and dedication of Ji'nan rockery, and more related knowledge, please click: http://www.lounge-f.com
, we will provide you with the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will continue to contribute to you and look forward to it.