Ji'nan rockery production can be roughly divided into independent type, type, open type, stress loose type and overlapping type five. The production of bonsai can be divided into the following steps:
1. Selection Basin
The bonsai is very particular about the lining of the basin and the shelf. There are sand basin, basin, disk, marble plate, stalactites "cloud plate", terrazzo plate etc.. The rocks commonly used for bonsai shallow rectangular or round the waist, under four feet, and protrude the disc along the edges, so as to enhance the decorative, white or pale blue, can show the water.
Two. The layout of the basin
Mountain bonsai is a highly generalized processing art. It must be carefully combined and carefully planned for rational layout. Therefore, several principles should be followed when combined modeling.
Three. Processing of stone material
1, sawing: according to the drawings that have been drawn, determine the main position and size of the body. Then use a small saw to slow down the bottom. Then the selected texture is clear, and the side of the cave is on the front, which is processed according to the desired effect. Turquoise available steel saw cut, hard rock with electric steel saw blade cutting sand. 2, must pay attention to important points: carved carved from the outline, with a hammer, chisel and other tools made the mountain, and then fine processing.
This article is about the friendship and dedication of Ji'nan rockery, and more related knowledge, please click: http://www.lounge-f.com, we will provide you with the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will continue to contribute to you and look forward to it.